LONGi Hi-MO array

Solar system for an apartment with evening backup power — a LONGi array of 6 × 550 W

6 × Hi-MO X10 Guardian LR7-60HVHL 550W: that is the LONGi array for an apartment that keeps 4 evening hours in reserve. Per day the profile runs air conditioner (1,200 W for 8 h), fridge (150 W for 8 h), lights & Wi-Fi (200 W for 8 h), TV (100 W for 6 h) and washing machine (800 W for 1 h). The load asks for 3 kWp and these modules install 3.3 kWp. Two more lines stand next to the array — an inverter at 5 kW, storage at 5.1 kWh. Each is a rating and not a product, since panels are the whole of this store's LONGi range.

One module measures 1990 × 1134 mm and weighs 16.3 kg; the 6 together put 13.5 m² of glass and 98 kg on the roof.

Sized for 8 hours instead of 4, this building keeps the same 3 kWp of LONGi modules and the same 5.1 kWh storage rating: the longer window fits inside it. Solar system for an apartment with overnight backup power

What is inside

  • Inverter×1

    Inverter rating to match: 5 kW (a size, not a LONGi unit)

  • Battery×1

    Storage rating to match: 5.1 kWh (a size, not a LONGi unit)

  • Hi-MO X10 Guardian LR7-60HVHL 550W

    Solar panels×6

    Hi-MO X10 Guardian LR7-60HVHL 550W

    AED 341 each

Solar panels3 kWp6 panelsInverter5 kWruns the placeBattery5.1 kWh~4 h after a cutApartment13.8 kWh/daywhat you use a day
How the energy moves through your system

The array, read from the module's record

The count comes from the energy, not from the roof. Added up, the appliances of this profile draw close to 13.8 kWh in twenty-four hours; the sizing assumes 5.7 hours of peak sun, which puts the array at 3 kWp. The calculator then takes the LONGi listing nearest 550 W, the Hi-MO X10 Guardian LR7-60HVHL 550W, and rounds up: 6 × 550 W is 3.3 kWp.

The Hi-MO X10 Guardian LR7-60HVHL at 550 W converts 24.4% of the light on its face and measures 1990 × 1134 × 30 mm — 244 W for each square metre of module. At 16.3 kg it loads the roof with 7.2 kg per m², the lowest figure of any module in this catalogue. The front is single glass, 1.6mm coated semi-tempered glass.

Side by side, the 6 modules are 13.5 m² of glass; their 98 kg is counted without rails or clamps. The 16 m² this page shows is larger because it is the sizing's allowance per module, not the glass itself. The record rates each module for 3,600 Pa of static load on its front and 2,400 Pa on its rear, and its hail test reads: 25mm Hailstone at the speed of 23m/s.

Electrically, a string gains 45.08 V of open-circuit voltage with every module, and 37.31 V once the modules work at full power, where each carries 14.74 A (15.45 A short-circuit). Wired as two strings of 3, the array stands at 135.2 V open-circuit and works at 111.9 V per string. The module itself sets a limit of 1500 V of system voltage, with a 25 A series fuse — 33 modules in a string at test conditions; open-circuit voltage climbs 0.2% for every °C the cells cool below 25 °C. The inverter chosen for the kit sets a tighter limit, and its DC window is the one the strings must fit.

On a hot roof, read the power coefficient first: this module's record gives -0.26%/°C. Ten degrees of cell temperature above the 25 °C test point take 2.6% off the rating — about 0.09 kW across this array. The record's nominal operating cell temperature is 45±2°C.

The inverter line reads 5 kW: with the motors of this profile starting together, the draw peaks at 4.9 kW. The storage line reads 5.1 kWh, set against the 2.3 kWh this load consumes in 4 hours. Both are sizes to buy against, not LONGi products: what can be ordered on this page is the modules.

The same array in another LONGi module

The calculator always takes the listing nearest 550 W. The roof of an apartment can have reasons to choose differently; each module below is counted for the same 3 kWp, with what its own record says and what that number of modules costs.

About this array

Which LONGi panel is counted for this apartment array, and how many?

6 panels of the Hi-MO X10 Guardian LR7-60HVHL 550W, a 24.4% module. Together they are 3.3 kWp, which covers the 3 kWp this load works out to.

How much roof and how much weight is that?

13.5 m² of module (6 × 2.26 m²) and 98 kg. This page allows 16 m² of roof for them, which leaves space around the rows.

What do the LONGi panels of this array cost?

6 × AED 341 is AED 2,046, or AED 0.62 per watt. That figure is the modules alone — no inverter, battery, mounting or labour. The module's own page prints the same amount per panel, and our store in Dubai or Riyadh is where the array changes hands.

What voltage do these panels put on a string?

Wired in series, every module brings a Voc of 45.08 V and a Vmp of 37.31 V. The record's system limit is 1500 V — 33 modules at test conditions — and the inverter's DC input range, lower than that, decides the real string length.

Are the inverter and the battery on this page LONGi products?

No. They are the sizes this load needs — 5 kW and 5.1 kWh — shown so the array can be matched to them. What this store lists from LONGi is 234 models of solar panel.

Can the same array be built from fewer panels?

Yes: 5 panels of the Hi-MO 9 Edge LR8-66HYD 670W reach the same 3 kWp, where this page counts 6. The panel itself is bigger — 670 W · 24.8% efficiency · 2382 × 1134 mm · 35.7 kg — so measure your rails against that length before choosing it.

Other LONGi arrays: this building, and this grid option

Count the LONGi panels for your own appliances